my66
a little restoration story
Carburetor
The way the carburetor looked when I got the car. |
|
After opening it, it was clear that a cleaning is due. |
|
My two barrels. |
|
Choke assembly. |
|
Cleaned |
|
and |
|
reassembled. |
|
Re-installed. |
Distributor
Cleaned the distributor assembly. I also replaced the vacuum advance unit and the points. I will switch to an electronic ignition soon. |
|
I also got new spark plugs, new plug wires, distributor cap and rotor. |
Engine
Besides an oil change and adjusting the valve play, I did not do much with the engine so far. |
Electrical
The original fuse box was in bad shape. Some wires were almost bare and the contacts were rusted. The fuse box is positioned pretty badly, especially if you have a leaking cowl. |
|
I decided to install a new fuse box with flat fuses and to move it to the engine compartment at the same time. |
|
The new fuse box installed at the engine firewall, passenger side. Next to it is my main switch. |
