Carburetor
	
	
The way the carburetor looked when I got the car.

	
After opening it, it was clear that a cleaning is due.

	
My two barrels.

Choke assembly.
	
Cleaned
	
and

	
reassembled.
	
Re-installed.
Distributor

	
Cleaned the distributor assembly. I also replaced the vacuum advance unit and the points. I will switch to an electronic ignition soon.
	
I also got new spark plugs, new plug wires, distributor cap and rotor.
Engine

	
Besides an oil change and adjusting the valve play, I did not do much with the engine so far.
Electrical
	
The original fuse box was in bad shape. Some wires were almost bare and the contacts were rusted. The fuse box is positioned pretty badly, especially if you have a leaking cowl.
	
I decided to install a new fuse box with flat fuses and to move it to the engine compartment at the same time.

	
The new fuse box installed at the engine firewall, passenger side. Next to it is my main switch.